COMING SOON

TracPak Quick Release Base, Mount Only

The TracPak Quick Release Base provides the foundation to mount one or two TrackPak Stackable Storage Boxes onto a single mounting point. This mount is compatible with all YakAttack MightyMounts, GearTrac, and most other factory-installed kayak accessory tracks. When attached to a track, the Quick Release Base features an array of slots, allowing for micro adjustments in each direction of the t-bolt. This should maximize compatibility by increasing the locations where the TrackPak will fit on your watercraft. If you would rather surface mount the quick release base, included are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. For surface mounting on anything other than the BlackPak Pro a 1/8” drill bit will be required for the install. Please use a handheld screwdriver and make sure to not overtighten the stainless screws. Made from marine grade polymers the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built or Life Guarantee.

  • Compatible with the TracPak Stackable Storage Box
  • Designed for use with up to two TrackPak boxes
  • Includes Quick Release Base, t-bolt, knob, and surface-mounting hardware
  • Item Weight: 0.4 lbs.
  • Product Dimensions: 8-13/16” x 4-1/16” x 1-9/16”
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: SSO-1004
  • UPC: 819731015180

WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only
 TracPak Quick Release Base, Mount Only

Overview

The TracPak Quick Release Base provides the foundation to mount one or two TrackPak Stackable Storage Boxes onto a single mounting point. This mount is compatible with all YakAttack MightyMounts, GearTrac, and most other factory-installed kayak accessory tracks. When attached to a track, the Quick Release Base features an array of slots, allowing for micro adjustments in each direction of the t-bolt. This should maximize compatibility by increasing the locations where the TrackPak will fit on your watercraft. If you would rather surface mount the quick release base, included are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. For surface mounting on anything other than the BlackPak Pro a 1/8” drill bit will be required for the install. Please use a handheld screwdriver and make sure to not overtighten the stainless screws. Made from marine grade polymers the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built or Life Guarantee.

  • Compatible with the TracPak Stackable Storage Box
  • Designed for use with up to two TrackPak boxes
  • Includes Quick Release Base, t-bolt, knob, and surface-mounting hardware
  • Item Weight: 0.4 lbs.
  • Product Dimensions: 8-13/16” x 4-1/16” x 1-9/16”
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: SSO-1004
  • UPC: 819731015180

WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Overview

The TracPak Quick Release Base provides the foundation to mount one or two TrackPak Stackable Storage Boxes onto a single mounting point. This mount is compatible with all YakAttack MightyMounts, GearTrac, and most other factory-installed kayak accessory tracks. When attached to a track, the Quick Release Base features an array of slots, allowing for micro adjustments in each direction of the t-bolt. This should maximize compatibility by increasing the locations where the TrackPak will fit on your watercraft. If you would rather surface mount the quick release base, included are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. For surface mounting on anything other than the BlackPak Pro a 1/8” drill bit will be required for the install. Please use a handheld screwdriver and make sure to not overtighten the stainless screws. Made from marine grade polymers the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built or Life Guarantee.

  • Compatible with the TracPak Stackable Storage Box
  • Designed for use with up to two TrackPak boxes
  • Includes Quick Release Base, t-bolt, knob, and surface-mounting hardware
  • Item Weight: 0.4 lbs.
  • Product Dimensions: 8-13/16” x 4-1/16” x 1-9/16”
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: SSO-1004
  • UPC: 819731015180

WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

TracPak Quick Release Base, Mount Only

SKU: SSO-1004

$10.00 (You save undefined)
1
/
12

TracPak Quick Release Base, Mount Only

SKU: SSO-1004

$10.00 (You save undefined)

The TracPak Quick Release Base provides the foundation to mount one or two TrackPak Stackable Storage Boxes onto a single mounting point. This mount is compatible with all YakAttack MightyMounts, GearTrac, and most other factory-installed kayak accessory tracks. When attached to a track, the Quick Release Base features an array of slots, allowing for micro adjustments in each direction of the t-bolt. This should maximize compatibility by increasing the locations where the TrackPak will fit on your watercraft. If you would rather surface mount the quick release base, included are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. For surface mounting on anything other than the BlackPak Pro a 1/8” drill bit will be required for the install. Please use a handheld screwdriver and make sure to not overtighten the stainless screws. Made from marine grade polymers the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built or Life Guarantee.

  • Compatible with the TracPak Stackable Storage Box
  • Designed for use with up to two TrackPak boxes
  • Includes Quick Release Base, t-bolt, knob, and surface-mounting hardware
  • Item Weight: 0.4 lbs.
  • Product Dimensions: 8-13/16” x 4-1/16” x 1-9/16”
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: SSO-1004
  • UPC: 819731015180

WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Find in stores near you!

Bundled Products

Shop New Products

 7" Aluminum Pliers ($29 Value)

7" Aluminum Pliers

$29.00 (You save undefined)

Overview

The TracPak Quick Release Base provides the foundation to mount one or two TrackPak Stackable Storage Boxes onto a single mounting point. This mount is compatible with all YakAttack MightyMounts, GearTrac, and most other factory-installed kayak accessory tracks. When attached to a track, the Quick Release Base features an array of slots, allowing for micro adjustments in each direction of the t-bolt. This should maximize compatibility by increasing the locations where the TrackPak will fit on your watercraft. If you would rather surface mount the quick release base, included are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. For surface mounting on anything other than the BlackPak Pro a 1/8” drill bit will be required for the install. Please use a handheld screwdriver and make sure to not overtighten the stainless screws. Made from marine grade polymers the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built or Life Guarantee.

  • Compatible with the TracPak Stackable Storage Box
  • Designed for use with up to two TrackPak boxes
  • Includes Quick Release Base, t-bolt, knob, and surface-mounting hardware
  • Item Weight: 0.4 lbs.
  • Product Dimensions: 8-13/16” x 4-1/16” x 1-9/16”
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: SSO-1004
  • UPC: 819731015180

WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Specifications

Current Stock:
Width: 13.50
Height: 5.25
Depth: 2.00
SKU: SSO-1004
.

Reviews

Questions & Answers

Explore this product

1

2

3

4