COMING SOON

LeaderBoard RotoGrip - 2 Pack

The Leaderboard RotoGrip is a variation of our award-winning RotoGrip Paddle Holder, but in comparison, this version features a soft but firm rubber wheel on one side and a hook on the other. This RotoGrip is designed specifically around the dimensions of the YakAttack Leaderboard and will not work with any other measuring boards on the market. The geometry of this re-imagined RotoGrip gives you a secure hold and quick deployment while on the water.

To secure your YakAttack LeaderBoard, you will need two LeaderBoard RotoGrips attached in-line on a track surface, preferably 6” or more from one another. Insert the underside of the LeaderBoard into the hooked side of the RotoGrip and rotate the board towards the wheels until it is in a vertical orientation and locked into place. The LeaderBoard will only release in one direction to prevent you from accidentally knocking it out into the water. To release and remove the LeaderBoard, roll the board away from the RotoGrip wheels towards the hooks, and the board will come out with ease.

The LeaderBoard RotoGrip can be mounted to any track solution, including YakAttack GearTrac, MightyMounts, and most other factory-installed kayak track systems. For most kayaks, this mounting option for the LeaderBoard is an in-line track mount, meaning both RotoGrips will be attached to the same section of track, and the LeaderBoard will cover and restrict additional track usage for the length of the measuring board. If you are looking for an offset, track-mounted solution, we offer a LeaderBoard-specific version of the DoubleHeader.  

Made from marine-grade polymers, the LeaderBoard RotoGrip is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.

 

  • Sold as a Two Pack
  • Only compatible with the YakAttack LeaderBoard (not compatible with other measuring boards from Ketch Products, Yak Gear, or the Hawg Trough)
  • In-line track mount, check out the DoubleHeader LeaderBoard for an offset track mount
  • 2.5” tall
  • LeaderBoard sold separately
  • Patent pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MCD-1004
  • UPC: 819731017023

 

WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack
 LeaderBoard RotoGrip - 2 Pack

Overview

The Leaderboard RotoGrip is a variation of our award-winning RotoGrip Paddle Holder, but in comparison, this version features a soft but firm rubber wheel on one side and a hook on the other. This RotoGrip is designed specifically around the dimensions of the YakAttack Leaderboard and will not work with any other measuring boards on the market. The geometry of this re-imagined RotoGrip gives you a secure hold and quick deployment while on the water.

To secure your YakAttack LeaderBoard, you will need two LeaderBoard RotoGrips attached in-line on a track surface, preferably 6” or more from one another. Insert the underside of the LeaderBoard into the hooked side of the RotoGrip and rotate the board towards the wheels until it is in a vertical orientation and locked into place. The LeaderBoard will only release in one direction to prevent you from accidentally knocking it out into the water. To release and remove the LeaderBoard, roll the board away from the RotoGrip wheels towards the hooks, and the board will come out with ease.

The LeaderBoard RotoGrip can be mounted to any track solution, including YakAttack GearTrac, MightyMounts, and most other factory-installed kayak track systems. For most kayaks, this mounting option for the LeaderBoard is an in-line track mount, meaning both RotoGrips will be attached to the same section of track, and the LeaderBoard will cover and restrict additional track usage for the length of the measuring board. If you are looking for an offset, track-mounted solution, we offer a LeaderBoard-specific version of the DoubleHeader.  

Made from marine-grade polymers, the LeaderBoard RotoGrip is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.

 

  • Sold as a Two Pack
  • Only compatible with the YakAttack LeaderBoard (not compatible with other measuring boards from Ketch Products, Yak Gear, or the Hawg Trough)
  • In-line track mount, check out the DoubleHeader LeaderBoard for an offset track mount
  • 2.5” tall
  • LeaderBoard sold separately
  • Patent pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MCD-1004
  • UPC: 819731017023

 

WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Overview

The Leaderboard RotoGrip is a variation of our award-winning RotoGrip Paddle Holder, but in comparison, this version features a soft but firm rubber wheel on one side and a hook on the other. This RotoGrip is designed specifically around the dimensions of the YakAttack Leaderboard and will not work with any other measuring boards on the market. The geometry of this re-imagined RotoGrip gives you a secure hold and quick deployment while on the water.

To secure your YakAttack LeaderBoard, you will need two LeaderBoard RotoGrips attached in-line on a track surface, preferably 6” or more from one another. Insert the underside of the LeaderBoard into the hooked side of the RotoGrip and rotate the board towards the wheels until it is in a vertical orientation and locked into place. The LeaderBoard will only release in one direction to prevent you from accidentally knocking it out into the water. To release and remove the LeaderBoard, roll the board away from the RotoGrip wheels towards the hooks, and the board will come out with ease.

The LeaderBoard RotoGrip can be mounted to any track solution, including YakAttack GearTrac, MightyMounts, and most other factory-installed kayak track systems. For most kayaks, this mounting option for the LeaderBoard is an in-line track mount, meaning both RotoGrips will be attached to the same section of track, and the LeaderBoard will cover and restrict additional track usage for the length of the measuring board. If you are looking for an offset, track-mounted solution, we offer a LeaderBoard-specific version of the DoubleHeader.  

Made from marine-grade polymers, the LeaderBoard RotoGrip is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.

 

  • Sold as a Two Pack
  • Only compatible with the YakAttack LeaderBoard (not compatible with other measuring boards from Ketch Products, Yak Gear, or the Hawg Trough)
  • In-line track mount, check out the DoubleHeader LeaderBoard for an offset track mount
  • 2.5” tall
  • LeaderBoard sold separately
  • Patent pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MCD-1004
  • UPC: 819731017023

 

WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

LeaderBoard RotoGrip - 2 Pack

SKU: MCD-1004

$25.00 (You save undefined)
1
/
12

LeaderBoard RotoGrip - 2 Pack

SKU: MCD-1004

$25.00 (You save undefined)

The Leaderboard RotoGrip is a variation of our award-winning RotoGrip Paddle Holder, but in comparison, this version features a soft but firm rubber wheel on one side and a hook on the other. This RotoGrip is designed specifically around the dimensions of the YakAttack Leaderboard and will not work with any other measuring boards on the market. The geometry of this re-imagined RotoGrip gives you a secure hold and quick deployment while on the water.

To secure your YakAttack LeaderBoard, you will need two LeaderBoard RotoGrips attached in-line on a track surface, preferably 6” or more from one another. Insert the underside of the LeaderBoard into the hooked side of the RotoGrip and rotate the board towards the wheels until it is in a vertical orientation and locked into place. The LeaderBoard will only release in one direction to prevent you from accidentally knocking it out into the water. To release and remove the LeaderBoard, roll the board away from the RotoGrip wheels towards the hooks, and the board will come out with ease.

The LeaderBoard RotoGrip can be mounted to any track solution, including YakAttack GearTrac, MightyMounts, and most other factory-installed kayak track systems. For most kayaks, this mounting option for the LeaderBoard is an in-line track mount, meaning both RotoGrips will be attached to the same section of track, and the LeaderBoard will cover and restrict additional track usage for the length of the measuring board. If you are looking for an offset, track-mounted solution, we offer a LeaderBoard-specific version of the DoubleHeader.  

Made from marine-grade polymers, the LeaderBoard RotoGrip is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.

 

  • Sold as a Two Pack
  • Only compatible with the YakAttack LeaderBoard (not compatible with other measuring boards from Ketch Products, Yak Gear, or the Hawg Trough)
  • In-line track mount, check out the DoubleHeader LeaderBoard for an offset track mount
  • 2.5” tall
  • LeaderBoard sold separately
  • Patent pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MCD-1004
  • UPC: 819731017023

 

WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Find in stores near you!

Bundled Products

Shop New Products

Overview

The Leaderboard RotoGrip is a variation of our award-winning RotoGrip Paddle Holder, but in comparison, this version features a soft but firm rubber wheel on one side and a hook on the other. This RotoGrip is designed specifically around the dimensions of the YakAttack Leaderboard and will not work with any other measuring boards on the market. The geometry of this re-imagined RotoGrip gives you a secure hold and quick deployment while on the water.

To secure your YakAttack LeaderBoard, you will need two LeaderBoard RotoGrips attached in-line on a track surface, preferably 6” or more from one another. Insert the underside of the LeaderBoard into the hooked side of the RotoGrip and rotate the board towards the wheels until it is in a vertical orientation and locked into place. The LeaderBoard will only release in one direction to prevent you from accidentally knocking it out into the water. To release and remove the LeaderBoard, roll the board away from the RotoGrip wheels towards the hooks, and the board will come out with ease.

The LeaderBoard RotoGrip can be mounted to any track solution, including YakAttack GearTrac, MightyMounts, and most other factory-installed kayak track systems. For most kayaks, this mounting option for the LeaderBoard is an in-line track mount, meaning both RotoGrips will be attached to the same section of track, and the LeaderBoard will cover and restrict additional track usage for the length of the measuring board. If you are looking for an offset, track-mounted solution, we offer a LeaderBoard-specific version of the DoubleHeader.  

Made from marine-grade polymers, the LeaderBoard RotoGrip is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.

 

  • Sold as a Two Pack
  • Only compatible with the YakAttack LeaderBoard (not compatible with other measuring boards from Ketch Products, Yak Gear, or the Hawg Trough)
  • In-line track mount, check out the DoubleHeader LeaderBoard for an offset track mount
  • 2.5” tall
  • LeaderBoard sold separately
  • Patent pending
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: MCD-1004
  • UPC: 819731017023

 

WARNING: This product contains a chemical known to the State of California to cause cancer. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Specifications

Current Stock:
Width: 5.25
Height: 7.50
Depth: 1.75
SKU: MCD-1004
.

Reviews

Questions & Answers

Explore this product

1

2

3

4