COMING SOON

7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak

For use with the BlackPak Pro as an external storage pocket or used to convert the TracPak into the TracPak with PicPocket QuickDraw. Includes all necessary hardware for both installs. Internal dimensions: 7” wide x 2.25” deep. Made from UV stabilized marine-grade polymers.

For use as a BlackPak accessory: The 7.5” PicPocket is compatible with the GridLoc Hole Pattern found on the BlackPak Pro so no drilling is required for installation. Includes four stainless steel screws. Please note, this does not fit 3600 sized tackle boxes. Internal dimensions: 7” wide x 2.25” deep.

For use as a TrackPak upgrade: This kit is used to convert the standard TracPak into the TracPak with PicPocket QuickDraw and includes all of the necessary hardware and bungee. When installed, this kit will prop the TracPak lid open at a 30° angle, fully exposing the PicPocket. This works exceptionally well when the TrackPak is mounted on a vertical surface like the side of the BlackPak Pro. It will also work when mounted horizontally on a GearTrac. It is made in the USA and backed by our Built for Life Guarantee.

  • PicPocket only, BlackPak and TracPak sold separately 
  • Compatible with the BlackPak Pro as an external pocket
  • Compatible with the TracPak as an upgrade
  • Includes hardware for BlackPak Pro install
  • Includes hardware and bungee for TracPak install
  • Internal dimensions: 7” wide x 2.25” deep
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: SSO-1006
  • UPC: 819731016392
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak
 7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak

Overview

For use with the BlackPak Pro as an external storage pocket or used to convert the TracPak into the TracPak with PicPocket QuickDraw. Includes all necessary hardware for both installs. Internal dimensions: 7” wide x 2.25” deep. Made from UV stabilized marine-grade polymers.

For use as a BlackPak accessory: The 7.5” PicPocket is compatible with the GridLoc Hole Pattern found on the BlackPak Pro so no drilling is required for installation. Includes four stainless steel screws. Please note, this does not fit 3600 sized tackle boxes. Internal dimensions: 7” wide x 2.25” deep.

For use as a TrackPak upgrade: This kit is used to convert the standard TracPak into the TracPak with PicPocket QuickDraw and includes all of the necessary hardware and bungee. When installed, this kit will prop the TracPak lid open at a 30° angle, fully exposing the PicPocket. This works exceptionally well when the TrackPak is mounted on a vertical surface like the side of the BlackPak Pro. It will also work when mounted horizontally on a GearTrac. It is made in the USA and backed by our Built for Life Guarantee.

  • PicPocket only, BlackPak and TracPak sold separately 
  • Compatible with the BlackPak Pro as an external pocket
  • Compatible with the TracPak as an upgrade
  • Includes hardware for BlackPak Pro install
  • Includes hardware and bungee for TracPak install
  • Internal dimensions: 7” wide x 2.25” deep
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: SSO-1006
  • UPC: 819731016392

Overview

For use with the BlackPak Pro as an external storage pocket or used to convert the TracPak into the TracPak with PicPocket QuickDraw. Includes all necessary hardware for both installs. Internal dimensions: 7” wide x 2.25” deep. Made from UV stabilized marine-grade polymers.

For use as a BlackPak accessory: The 7.5” PicPocket is compatible with the GridLoc Hole Pattern found on the BlackPak Pro so no drilling is required for installation. Includes four stainless steel screws. Please note, this does not fit 3600 sized tackle boxes. Internal dimensions: 7” wide x 2.25” deep.

For use as a TrackPak upgrade: This kit is used to convert the standard TracPak into the TracPak with PicPocket QuickDraw and includes all of the necessary hardware and bungee. When installed, this kit will prop the TracPak lid open at a 30° angle, fully exposing the PicPocket. This works exceptionally well when the TrackPak is mounted on a vertical surface like the side of the BlackPak Pro. It will also work when mounted horizontally on a GearTrac. It is made in the USA and backed by our Built for Life Guarantee.

  • PicPocket only, BlackPak and TracPak sold separately 
  • Compatible with the BlackPak Pro as an external pocket
  • Compatible with the TracPak as an upgrade
  • Includes hardware for BlackPak Pro install
  • Includes hardware and bungee for TracPak install
  • Internal dimensions: 7” wide x 2.25” deep
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: SSO-1006
  • UPC: 819731016392

7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak

SKU: SSO-1005

$10.00 (You save undefined)
1
/
12

7.5" GridLoc PicPocket - Compatible with BlackPak Pro or TracPak

SKU: SSO-1005

$10.00 (You save undefined)

For use with the BlackPak Pro as an external storage pocket or used to convert the TracPak into the TracPak with PicPocket QuickDraw. Includes all necessary hardware for both installs. Internal dimensions: 7” wide x 2.25” deep. Made from UV stabilized marine-grade polymers.

For use as a BlackPak accessory: The 7.5” PicPocket is compatible with the GridLoc Hole Pattern found on the BlackPak Pro so no drilling is required for installation. Includes four stainless steel screws. Please note, this does not fit 3600 sized tackle boxes. Internal dimensions: 7” wide x 2.25” deep.

For use as a TrackPak upgrade: This kit is used to convert the standard TracPak into the TracPak with PicPocket QuickDraw and includes all of the necessary hardware and bungee. When installed, this kit will prop the TracPak lid open at a 30° angle, fully exposing the PicPocket. This works exceptionally well when the TrackPak is mounted on a vertical surface like the side of the BlackPak Pro. It will also work when mounted horizontally on a GearTrac. It is made in the USA and backed by our Built for Life Guarantee.

  • PicPocket only, BlackPak and TracPak sold separately 
  • Compatible with the BlackPak Pro as an external pocket
  • Compatible with the TracPak as an upgrade
  • Includes hardware for BlackPak Pro install
  • Includes hardware and bungee for TracPak install
  • Internal dimensions: 7” wide x 2.25” deep
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: SSO-1006
  • UPC: 819731016392

Find in stores near you!

Bundled Products

Shop New Products

Overview

For use with the BlackPak Pro as an external storage pocket or used to convert the TracPak into the TracPak with PicPocket QuickDraw. Includes all necessary hardware for both installs. Internal dimensions: 7” wide x 2.25” deep. Made from UV stabilized marine-grade polymers.

For use as a BlackPak accessory: The 7.5” PicPocket is compatible with the GridLoc Hole Pattern found on the BlackPak Pro so no drilling is required for installation. Includes four stainless steel screws. Please note, this does not fit 3600 sized tackle boxes. Internal dimensions: 7” wide x 2.25” deep.

For use as a TrackPak upgrade: This kit is used to convert the standard TracPak into the TracPak with PicPocket QuickDraw and includes all of the necessary hardware and bungee. When installed, this kit will prop the TracPak lid open at a 30° angle, fully exposing the PicPocket. This works exceptionally well when the TrackPak is mounted on a vertical surface like the side of the BlackPak Pro. It will also work when mounted horizontally on a GearTrac. It is made in the USA and backed by our Built for Life Guarantee.

  • PicPocket only, BlackPak and TracPak sold separately 
  • Compatible with the BlackPak Pro as an external pocket
  • Compatible with the TracPak as an upgrade
  • Includes hardware for BlackPak Pro install
  • Includes hardware and bungee for TracPak install
  • Internal dimensions: 7” wide x 2.25” deep
  • Made in the USA
  • Covered by our Built for Life Guarantee
  • SKU: SSO-1006
  • UPC: 819731016392

Specifications

Current Stock:
Width: 8.00
Height: 13.75
Depth: 2.38
SKU: SSO-1005
.

Reviews

Questions & Answers

Videos

Explore this product

1

2

3

4