COMING SOON

Through Hull Panel Connector

The Through Hull Panel Connector is compatible with YakAttack and Nocqua Lithium Battery Kits. This kit provides the ability to run your power connection through the hull of your kayak/boat, hatch, or some type of battery box or container. For example, you could store a YakAttack/Nocqua battery on the inside of a Bonafide Kayaks DryPod or YakAtack BlackPak Pro and have a quick disconnect port for your power cable located on the outside. The Through Hull Panel Connector features a tethered cap that allows for quick connectivity of your device’s power cable when in use and creates a water tight seal with not in use. The tag end of the panel connector is 4” in length. For instillation a 5/8” hole is required and stainless steel hardware is included. If you are looking for our Through Hull Wiring Kits for other lithium ion or lead acid batteries not from YakAttack or Nocqua, check out our GridLoc Through Hull Wiring Kit and in the standard size or XL. 

  • Compatible with YakAttack and Nocqua Lithium Battery Kits
  • Requires a 5/8” hole
  • Footprint: 1” x 1”
  • Tag end measures 4” long
  • Stainless Steel Hardware Included
  • SKU: EMS-1002
  • UPC: 819731016231
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector
 Through Hull Panel Connector

Overview

The Through Hull Panel Connector is compatible with YakAttack and Nocqua Lithium Battery Kits. This kit provides the ability to run your power connection through the hull of your kayak/boat, hatch, or some type of battery box or container. For example, you could store a YakAttack/Nocqua battery on the inside of a Bonafide Kayaks DryPod or YakAtack BlackPak Pro and have a quick disconnect port for your power cable located on the outside. The Through Hull Panel Connector features a tethered cap that allows for quick connectivity of your device’s power cable when in use and creates a water tight seal with not in use. The tag end of the panel connector is 4” in length. For instillation a 5/8” hole is required and stainless steel hardware is included. If you are looking for our Through Hull Wiring Kits for other lithium ion or lead acid batteries not from YakAttack or Nocqua, check out our GridLoc Through Hull Wiring Kit and in the standard size or XL. 

  • Compatible with YakAttack and Nocqua Lithium Battery Kits
  • Requires a 5/8” hole
  • Footprint: 1” x 1”
  • Tag end measures 4” long
  • Stainless Steel Hardware Included
  • SKU: EMS-1002
  • UPC: 819731016231

Overview

The Through Hull Panel Connector is compatible with YakAttack and Nocqua Lithium Battery Kits. This kit provides the ability to run your power connection through the hull of your kayak/boat, hatch, or some type of battery box or container. For example, you could store a YakAttack/Nocqua battery on the inside of a Bonafide Kayaks DryPod or YakAtack BlackPak Pro and have a quick disconnect port for your power cable located on the outside. The Through Hull Panel Connector features a tethered cap that allows for quick connectivity of your device’s power cable when in use and creates a water tight seal with not in use. The tag end of the panel connector is 4” in length. For instillation a 5/8” hole is required and stainless steel hardware is included. If you are looking for our Through Hull Wiring Kits for other lithium ion or lead acid batteries not from YakAttack or Nocqua, check out our GridLoc Through Hull Wiring Kit and in the standard size or XL. 

  • Compatible with YakAttack and Nocqua Lithium Battery Kits
  • Requires a 5/8” hole
  • Footprint: 1” x 1”
  • Tag end measures 4” long
  • Stainless Steel Hardware Included
  • SKU: EMS-1002
  • UPC: 819731016231

Through Hull Panel Connector

SKU: EMS-1002

$15.00 (You save undefined)
1
/
12

Through Hull Panel Connector

SKU: EMS-1002

$15.00 (You save undefined)

The Through Hull Panel Connector is compatible with YakAttack and Nocqua Lithium Battery Kits. This kit provides the ability to run your power connection through the hull of your kayak/boat, hatch, or some type of battery box or container. For example, you could store a YakAttack/Nocqua battery on the inside of a Bonafide Kayaks DryPod or YakAtack BlackPak Pro and have a quick disconnect port for your power cable located on the outside. The Through Hull Panel Connector features a tethered cap that allows for quick connectivity of your device’s power cable when in use and creates a water tight seal with not in use. The tag end of the panel connector is 4” in length. For instillation a 5/8” hole is required and stainless steel hardware is included. If you are looking for our Through Hull Wiring Kits for other lithium ion or lead acid batteries not from YakAttack or Nocqua, check out our GridLoc Through Hull Wiring Kit and in the standard size or XL. 

  • Compatible with YakAttack and Nocqua Lithium Battery Kits
  • Requires a 5/8” hole
  • Footprint: 1” x 1”
  • Tag end measures 4” long
  • Stainless Steel Hardware Included
  • SKU: EMS-1002
  • UPC: 819731016231

Find in stores near you!

Bundled Products

Shop New Products

 7" Aluminum Pliers ($29 Value)

7" Aluminum Pliers

$29.00 (You save undefined)

Overview

The Through Hull Panel Connector is compatible with YakAttack and Nocqua Lithium Battery Kits. This kit provides the ability to run your power connection through the hull of your kayak/boat, hatch, or some type of battery box or container. For example, you could store a YakAttack/Nocqua battery on the inside of a Bonafide Kayaks DryPod or YakAtack BlackPak Pro and have a quick disconnect port for your power cable located on the outside. The Through Hull Panel Connector features a tethered cap that allows for quick connectivity of your device’s power cable when in use and creates a water tight seal with not in use. The tag end of the panel connector is 4” in length. For instillation a 5/8” hole is required and stainless steel hardware is included. If you are looking for our Through Hull Wiring Kits for other lithium ion or lead acid batteries not from YakAttack or Nocqua, check out our GridLoc Through Hull Wiring Kit and in the standard size or XL. 

  • Compatible with YakAttack and Nocqua Lithium Battery Kits
  • Requires a 5/8” hole
  • Footprint: 1” x 1”
  • Tag end measures 4” long
  • Stainless Steel Hardware Included
  • SKU: EMS-1002
  • UPC: 819731016231

Specifications

Current Stock:
Width: 7.50
Height: 3.25
Depth: 1.50
SKU: EMS-1002
.

Reviews

Questions & Answers

Explore this product

1

2

3

4