How to Install a Torqeedo Ultralight 1103 on a Native Titan 13.5

by YakAttack

In the video below Jeff Little of Torqeedo goes step by step for how to install a Torqeedo Ultralight 1103 on a Native Titan 13.5 fishing kayak. With the Native Titan being a pedal propelled kayak Jeff utilizes the foot brace rails and the Dual Action Foot Braces from Bonafide to create foot controlled steering. This makes for easy control and steering for the Ultralight 1103 motor. With this setup they were able to achieve a top speed of 5.8 mph using the Torqeedo Ultralight 1103 which is a 3 HP equivalent. Here is the link to the Torqeedo product page. 

Parts List:

  • Bonafide SS Series Steering Kit
  • 1 set Bonafide foot pegs 
  • 1 set Bonafide Foot  tracks
  • 4  x 90 degree Mighty Mount Adapters (I only used the 90 degree plastic part. I did not use the bolt, spring and knob) LNL-1007
  • 6 LoPro Wing Knobs WK 1420-4
  • 4 1.5 inch Mighty Bolts
  • 2 2 inch Mighty Bolts
  • 2 Vertical Tie Downs AAP-1025 (although two Tie Down Eyelets AAP-1016 would be better for this install, and would replace the 2 inch Mighty Bolts and two of the 6 LoPro Wing Knobs)
  • Six sets of 1.5 inch 1/4 - 20 Stainless Steel bolt/nut/washer
  • 5 inch Round Hatch
  • Marine Goop